Содержание
- MAINTENANCE RESET: TOYOTA HIGHLANDER
- 2000-2007 Oil Light/Maint Reqd Reset Toyota Highlander
- STEP 1
- STEP 2
- STEP 3
- STEP 4
- STEP 5
- 2005-2006-2007 Maint Reqd Reset Toyota Highlander
- STEP 1
- STEP 2
- STEP 3
- STEP 4
- STEP 5
- 2008-2013 Highlander Maintenance Required Soon Reset
- STEP 1
- STEP 2
- STEP 3
- STEP 4
- 2013-2020 Toyota Landcruiser Service Maintenance Required Reset
- STEP 1
- STEP 2
- STEP 3
- STEP 4
- STEP 5
- This tutorial will work for the following model
MAINTENANCE RESET: TOYOTA HIGHLANDER
Complete Instruction on how to reset the Oil Light & Service Maintenance Required Reminder on Toyota Highlander/Kluger(XU20, XU40, XU50, XU70, HYBRID, LE, LIMITED, SE, XLE) from year 2000-2001-2002-2003-2004-2005-2006-2007-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020.
2000-2007 Oil Light/Maint Reqd Reset Toyota Highlander
STEP 1
STEP 2
- Press the ODO/TRIP BUTTON to display to ODO.
STEP 3
STEP 4
- Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “000000” is displayed.
STEP 5
- Then Turn the Ignition OFF. Then Turn the ENGINE ON to verify if the OIL LIGHT is reset.
- If fail Repeat the Procedure.
2005-2006-2007 Maint Reqd Reset Toyota Highlander
STEP 1
STEP 2
- Press the ODO/TRIP BUTTON to display to ODO.
STEP 3
STEP 4
- Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “MAINT REQD RESET COMPLETED” is displayed.
STEP 5
- Then Turn the Ignition OFF. Then Turn the ENGINE ON to verify if the MAINT REQD is reset.
- If fail Repeat the Procedure.
2008-2013 Highlander Maintenance Required Soon Reset
STEP 1
STEP 2
- Press the ODO/TRIP BUTTON to display to TRIP A.
STEP 3
- Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “RESETTING MAINTENANCE DATA COMPLETED” is displayed.
STEP 4
2013-2020 Toyota Landcruiser Service Maintenance Required Reset
STEP 1
STEP 2
- Press The ODO/Trip Button To Display TRIP A.
STEP 3
STEP 4
- While Holding The Odo/Trip Reset Button, Press The “ENGINE START STOP” Button Twice, Don’t Release The Odo/Trip Button, Until The RESETTING MAINTENANCE DATA Is Complete.
STEP 5
This tutorial will work for the following model
Thank you very much 🙂 -erwin