Ошибка b2191 nissan qashqai

Nissan Murano. Instruction — page 1237

Performs ID verification through BCM and Intelligent Key when push-button ignition switch is pressed.
Prohibits the release of steering lock (models with steering lock unit) or start of engine when an unregistered
ID of Intelligent Key is used.

INFOID:0000000009722739

DTC CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

Press the push-button ignition switch

Check “Self diagnostic result” with CONSULT.

SEC-45, «Diagnosis Procedure»

INFOID:0000000009722740

Perform initialization of BCM and registration of Intelligent Key using CONSULT.

Can the system be initialized and can the engine be started with registered Intelligent Key?

Perform initialization of BCM and registration of Intelligent Key using CONSULT.

Can the system be initialized and can the engine be started with registered Intelligent Key?

CHECK INTERMITTENT INCIDENT

GI-44, «Intermittent Incident»

The ID verification result between BCM and Intelligent Key
is NG. The registration is necessary.

[WITH INTELLIGENT KEY SYSTEM]

B2192 ID DISCORD, IMMU-ECM

INFOID:0000000009722741

BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK.
ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if
ignition switch is turned ON.

INFOID:0000000009722742

NOTE:
• If DTC B2192 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to

• If DTC B2192 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to

DTC CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

Turn ignition switch ON under the following conditions.

Selector lever is in the P or N position.

Читайте также:  Nissan qashqai задние фонари диоды

Do not depress brake pedal.

Check “Self diagnostic result” with CONSULT.

SEC-46, «Diagnosis Procedure»

INFOID:0000000009722743

Perform initialization of BCM and registration of Intelligent Key using CONSULT.
Can the system be initialized and can the engine be started with registered Intelligent Key?

BCS-98, «Removal and Installation»

Perform initialization of BCM and registration of Intelligent Key using CONSULT.

Can the system be initialized and can the engine be started with registered Intelligent Key?

EC-16, «ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special

Perform initialization of BCM and registration of Intelligent Key using CONSULT.

Can the system be initialized and can the engine be started with registered Intelligent Key?

CHECK INTERMITTENT INCIDENT

GI-44, «Intermittent Incident»

The ID verification result between BCM and ECM is
NG. The registration is necessary.

B2192 ID DISCORD, IMMU-ECM

[WITH INTELLIGENT KEY SYSTEM]

[WITH INTELLIGENT KEY SYSTEM]

B2193 CHAIN OF ECM-IMMU

INFOID:0000000009722744

BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK.
ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if
ignition switch is turned ON.

INFOID:0000000009722745

NOTE:
• If DTC B2193 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to

• If DTC B2193 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to

DTC CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

Turn ignition switch ON under the following conditions.

Selector lever is in the P or N position.

Do not depress brake pedal.

Читайте также:  Замена шатунных вкладышей mitsubishi outlander

Check “Self diagnostic result” with CONSULT.

SEC-48, «Diagnosis Procedure»

INFOID:0000000009722746

BCS-98, «Removal and Installation»

Perform initialization of BCM and registration of Intelligent Key using CONSULT.

EC-16, «ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special

Inactive communication between ECM and BCM

(The CAN communication line is
open or shorted)

Источник

Оцените статью
Adblock
detector