Bimmer code bmw x5 f15

Supported coding options

Enable/disable the checkbox in the settings in the iDrive system to turn the acoustic pedestrian protection on or off.

Values:
Requirements:
Remember acoustic pedestrian protection setting
Values:
Requirements:
Acoustical lock/unlock confirmation
Values:
Requirements:
Checkbox acoustical lock confirmation

Enable/disable the checkbox in the settings for doors/keys in the iDrive system to enable/disable the acoustical lock confirmation. If the checkbox in the iDrive system does not allow selection, please check if “Acoustical lock/unlock confirmation” in the “Roof Function Center” control unit is set to “Active“ also. Please note that the car has to be equipped with an alarm system.

Values:
Requirements:
Confirmation sound duration
Values:
Requirements:
Confirmation sound frequency
Values:
Requirements:
Confirmation sound volume
Values:
Requirements:
Active Cruise Control default distance
Values:
Requirements:
Active Sound Design deactivation
Values:
Requirements:
Air circulation setting memory

Enable/disable storing of the air circulation setting. If this function is active, the last used air circulation setting will be restored during the next start of the car.

Values:
Requirements:
Air conditioning on in AUTO mode
Values:
Requirements:
Air conditioning setting memory

Enable/disable storing of the air conditioning setting. If this function is active, the last used air conditioning setting will be restored during the next start of the car.

Values:
Requirements:
Alarm sound
Values:
Requirements:
Interior motion detection

Enable/disable the interior motion detection of the alarm system. Please note that this function requires the car to be equipped with an alarm system.

Values:
Requirements:
OBD alarm

The alarm is triggered when the vehicle is locked and communication via the OBD port is detected. Please note that this function requires the car to be equipped with an alarm system.

Values:
Requirements:
Ambient lighting brightness decoupling from instrument cluster

Enable/disable the decoupling of the brightness of the ambient lighting from the brightness of the instrument cluster.

Values:
Requirements:
Ambient lighting color bottom
Values:
  • EfficientDynamics blue
  • Green
  • Iceblue
  • Light blue
  • Light green
  • Light red
  • Orange
  • Pink
  • Red
  • Turquoise
  • Violet
  • White
  • Yellow
Requirements:
Ambient lighting color center
Values:
  • EfficientDynamics blue
  • Green
  • Iceblue
  • Light blue
  • Light green
  • Light red
  • Orange
  • Pink
  • Red
  • Turquoise
  • Violet
  • White
  • Yellow
Requirements:
Ambient lighting color top
Values:
  • EfficientDynamics blue
  • Green
  • Iceblue
  • Light blue
  • Light green
  • Light red
  • Orange
  • Pink
  • Red
  • Turquoise
  • Violet
  • White
  • Yellow
Requirements:
Angel Eyes brightness

The brightness of the Angel Eyes with low beam or parking lights. Use a backup to revert this coding once it has been applied. Please note that this coding has to be carried out for both headlights (left and right) separately.

Values:
Requirements:
Angel Eyes brightness low beam
Values:
Requirements:
  • “Body Domain Controller” BDC_BODY or “Headlight Driver Module left” TMS_03 or “Headlight Driver Module right” TMS_03 control unit
Angel Eyes brightness parking lights
Values:
Requirements:
  • “Body Domain Controller” BDC_BODY or “Headlight Driver Module left” TMS_03 or “Headlight Driver Module right” TMS_03 control unit
Читайте также:  Авто китайцы все кроссоверы
Bluetooth audio streaming

This coding enables wireless audio streaming via Bluetooth. Use a backup to revert this coding once it has been applied.

Values:
Requirements:
Maximum volume at start-up

The maximum volume that is saved when the iDrive system is shut off and restored automatically on the next start-up.

Values:
Requirements:
Ringtone
Values:
Requirements:
Shut off iDrive system when driver door is opened
Values:
Requirements:
Warning chime
Values:
  • BMW i warning chime
  • BMW warning chime
  • Mini warning chime
  • Rolls Royce warning chime
Requirements:
Auto Start Stop function in ECO mode
Values:
Requirements:
Auto Start Stop function memory

Save the last used Auto Start Stop function setting for the next start of the car. Please note that the Auto Start Stop function is automatically activated again in ECO PRO driving mode.

Values:
Requirements:
Auto Start Stop function off by default

Set the Auto Start Stop function to off by default when the car is started. Please note that the Auto Start Stop function is automatically activated again in ECO PRO driving mode.

Values:
Requirements:
Battery type

The type and capacity of the 12 V battery. Please note that this value must only be modified if the battery in the car has been replaced. After coding, the battery replacement has to be registered using “BimmerLink” additionally.

Values:
  • 20 Ah
  • 40 Ah
  • 40 Ah AGM
  • 46 Ah
  • 55 Ah AGM
  • 60 Ah AGM
  • 60 Ah EFB
  • 70 Ah
  • 70 Ah AGM
  • 70 Ah EFB
  • 80 Ah
  • 80 Ah AGM
  • 80 Ah EFB
  • 90 Ah
  • 90 Ah AGM
  • 105 Ah AGM
Requirements:
Blind spot detection activation speed
Values:
Requirements:
Brake Force Display activation brake force
Values:
Requirements:
Brake Force Display activation speed
Values:
Requirements:
CarPlay fullscreen mode

Show CarPlay in full screen mode. Important: This coding only works with the iDrive software versions “NBTevo_X“ and “NBTevo_Y“. You can easily check for yourself which software version is currently installed in your vehicle. To do this, navigate to the version info in the iDrive system in your vehicle (Navigation > Settings > Position and version > Version information). If you can see “NBTevo_X“ or “NBTevo_Y“ here, then full screen mode will work. If you see “NBTevo_N“, “NBTevo_O“, “NBTevo_P“, “NBTevo_Q“, “NBTevo_R“, “NBTevo_S“, “NBTevo_U“, “NBTEvo_V“ or “NBTEvo_W“ instead, then full screen mode can not be enabled with BimmerCode unfortunately.

Values:
Requirements:
Convenient closing

Enable/disable the convenient closing. During convenient closing the windows are closed and the power folding mirrors are folded in. To trigger convenient closing the lock button on the remote control has to be pressed and held. Please note that this option does not work for convertibles.

Values:
Requirements:
Convenient closing delay
Values:
Requirements:
Convenient closing delay front windows
Values:
Requirements:
Convenient closing delay sunroof
Values:
Requirements:
Convenient closing with Comfort Access

Enable/disable the convenient closing with the Comfort Access. For convenient closing with the Comfort Access the door handle has to be touched and held at the ribbed surface. Please note that this option does not work for convertibles.

Читайте также:  Лампочки kia sportage 2009
Values:
Requirements:
Convenient closing with remote control

Enable/disable the convenient closing with the remote control. For convenient closing with the remote control, the lock button has to be pressed and held. Please note that this option does not work for convertibles.

Values:
Requirements:
Convenient opening

Enable/disable the convenient opening. During convenient opening the windows are opened and the power folding mirrors are unfolded. For a convenient opening the unlock button on the remote control has to be pressed and held. When using Comfort Access, the door handle has to be gripped and held.

Values:
Requirements:
Convenient opening delay
Values:
Requirements:
Convenient opening delay rear windows
Values:
Requirements:
Convenient opening delay sunroof
Values:
Requirements:
Convenient opening with remote control

Enable/disable the convenient opening with the remote control. For convenient opening with the remote control, the unlock button has to be pressed and held.

Values:
Requirements:
Checkbox daytime running light

Enable/disable the checkbox in the lighting settings in the iDrive system to turn the daytime running light on or off.

Values:
Requirements:
Daytime running light mode
Values:
Requirements:
Daytime running light tail lights inner part
Values:
Requirements:
Daytime running light tail lights outer part
Values:
Requirements:
Display full text messages

Enable the full display of text messages while driving. Use a backup to revert this coding once it has been applied.

Values:
Requirements:
Rear view camera zoom
Values:
Requirements:
Service history
Values:
Requirements:
Start animation

The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.

Values:
  • ALPINA
  • BMW 1
  • BMW 2
  • BMW i
  • Christmas
  • Connected Drive 1
  • Connected Drive 2
  • M variant 1
  • MINI variant 1
  • Rolls Royce
Requirements:
Start animation

The animation that is displayed when the iDrive system is started. Please note that the animation is not visible every time you start the car, but only under certain circumstances.

Values:
  • ALPINA
  • BMW i
  • Connected Drive
  • M variant 1
  • M variant 2
  • MINI John Cooper Works
  • MINI variant 1
  • MINI variant 2
  • Rolls Royce
Requirements:
Start screen
Values:
Requirements:
Tire pressure control

The displayed values of the tire pressure control in the iDrive system. Please note that the car has to be equipped with the required sensors to make this work.

Values:
Requirements:
Volume popup
Values:
Requirements:
Additional digital speed in speedometer
Values:
Requirements:
Average values reset
Values:
Requirements:
Digital speed in board computer

Enable/disable the display of the digital speed in the board computer. Please toggle the displayed information in the board computer with the button in the turn signal lever until the specific display appears.

Values:
Requirements:
Empty menu item in board computer
Values:
Requirements:
M Performance logo

The model-specific M Performance logo that is displayed in the bottom right in the instrument cluster.

Читайте также:  Разборка задней двери volkswagen tiguan
Values:
  • Not active
  • BMW
  • M Performance
  • BMW i
  • M Performance X5
  • M Performance X6
Requirements:
Speedometer scale end value
Values:
Requirements:
Start logo

The logo that is displayed in the center of the screen during the start-up of the instrument cluster.

Values:
Requirements:
“Speed Limit Info” road sign type

The road sign type of the “Speed Limit Info”. Please note that the car has to be equipped with the “Speed Limit Info” by factory.

Values:
Requirements:
Horn signal when locking the car with engine running
Values:
Requirements:
Time until automatic lock

The car is locked automatically again if it has been unlocked and no door has been opened within the set time.

Values:
  • 10 seconds
  • 30 seconds
  • 1 minute
  • 2 minutes
  • 5 minutes
  • 10 minutes
Requirements:
Unlock doors automatically
Values:
Requirements:
Window lifter interruption when opening a door
Values:
Requirements:
Road edge warning
Values:
Requirements:
Default driving mode
Values:
Requirements:
Driving mode memory

Enable the driving mode memory. The last used driving mode is stored when the car is turned off and restored on the next start-up. Use a backup to revert this coding once it has been applied.

Values:
Requirements:
Easy entry protection area
Values:
Requirements:
Easy entry seat movement

In order to make it easier to get in the car, the seat is automatically moved back when unlocked and then returns to its original position when the ignition is switched on. Please note that the car has to be equipped with electrically adjustable seats with memory function.

Values:
Requirements:
Easy entry seat travel
Values:
Requirements:
Low fuel warning 1
Values:
  • 10 kilometers
  • 10 miles
  • 20 kilometers
  • 20 miles
  • 30 kilometers
  • 30 miles
  • 40 kilometers
  • 50 kilometers
  • Not active
Requirements:
Low fuel warning 2
Values:
  • 40 miles
  • 50 kilometers
  • 50 miles
  • 60 kilometers
  • 70 kilometers
  • 80 kilometers
  • 90 kilometers
  • Not active
Requirements:
HUD music lists
Values:
Requirements:
HUD phone book
Values:
Requirements:
HUD telephone list
Values:
Requirements:
HUD turn signals (1 of 2)

Enable/disable the turn signals in the HUD. Please note that “HUD turn signals (2 of 2)” in the “Headunit” control unit has to be enabled additionally. This function is not supported, if the car is equipped with a fully digital instrument cluster.

Values:
Requirements:
HUD turn signals (2 of 2)

Enable/disable the turn signals in the HUD. Please note that “HUD turn signals (1 of 2)” in the “Instrument Cluster” control unit has to be enabled additionally. It may also be necessary to enable the corresponding checkbox in the HUD settings in the iDrive system in the car. This function is not supported, if the car is equipped with a fully digital instrument cluster.

Values:
Requirements:
HUD voice input
Values:
Requirements:

Источник

Оцените статью
Adblock
detector