- Code No. C2116 Low or high power supply voltage in pump motor
- STEP 2. Diagnosis code recheck after resetting CAN bus lines
- Q. Is the diagnosis code No. C2116 set?
- STEP 3. Battery check
- Q. Is the battery in good condition?
- STEP 4. Charging system check
- Q. Is the charging system in good condition?
- STEP 5. Connector check: A-58 ASC-ECU connector
- Q. Is the check result normal?
- STEP 6. Fusible link check: Check the fusible link No.26.
- Q. Is the check result normal?
- STEP 7. Resistance measurement at A-58 ASC-ECU connector
- Q. Is the check result normal?
- STEP 8. Voltage measurement at the A-58 ASC-ECU connector
- Q. Is the check result normal?
- STEP 9. Resistance measurement at A-58 ASC-ECU connector
- Q. Is the check result normal?
Code No. C2116 Low or high power supply voltage in pump motor
STEP 2. Diagnosis code recheck after resetting CAN bus lines
Q. Is the diagnosis code No. C2116 set?
STEP 3. Battery check
Q. Is the battery in good condition?
STEP 4. Charging system check
Q. Is the charging system in good condition?
STEP 5. Connector check: A-58 ASC-ECU connector
Q. Is the check result normal?
STEP 6. Fusible link check: Check the fusible link No.26.
Q. Is the check result normal?
STEP 7. Resistance measurement at A-58 ASC-ECU connector
Q. Is the check result normal?
Replace the fusible link No.26. Then go to Step 11.
The short circuit may be present in the power supply circuit. Repair the wiring harness between the A-58 ASC-ECU connector terminal No.1 and the fusible link No.26, and then replace the fusible link No.26. Then go to Step 11.
STEP 8. Voltage measurement at the A-58 ASC-ECU connector
Q. Is the check result normal?
The open circuit may be present in the power supply circuit. Repair the wiring harness between the A-58 ASC-ECU connector terminal No.1 and the fusible link No.26. Then go to Step 11.
STEP 9. Resistance measurement at A-58 ASC-ECU connector
Q. Is the check result normal?
An open circuit may be present in the earth circuit. Repair the wiring harness between the A-58 ASC-ECU connector terminal No.16 and the body earth, and between the A-58 ASC-ECU connector terminal No.47 and the body earth. Then go to Step 11.