Ошибка 480a bmw x5 e70
2019 BMW X5 DHP, XDrive50i, M brakes
Looking for some help clearing the �480A12 — Read Brake Pad Sensor — rear Axle — wear limited reached� error. Wondering if anyone has successfully completed this at home, and if there�s some secret sauce I�m missing, or if once stored, only the dealer can clear this error code.
Long story, My 2019 BMW X5 (M brakes, 38K) started showing the rear brake pad sensor warning, I checked the pads, and they were worn. Replaced all around with OEM ATE pads, and replaced the rear brake pad sensor (GENUINE BMW 34-35-6-870-352) following the TIS instructions (activated parking brake in correct sequence). Car drives great, brakes work perfectly.
Unfortunately the computer is still showing the Rear Brake pad sensor warning. The reset option does not show in the dash�s diagnostic mode and my attempts to clear the error using BimmerLink are met with �Clearing failed.. please try again�.
I went so far as to short the sensor (don�t throw away your used sensor, it comes in handy) and go through the reset sequence multiple times, but to no avail.
There�s a lot of talk and videos on the internet, but I have yet to find a thread documenting an individual actually clearing this error code on MY2019.
Has anyone out there successfully cleared this error code on a 2019 BMW X5?
Any help would be greatly appreciated.
Wouldn’t your car still be under warranty and even free maintenance? Why not just take it to the dealership and enjoy a loaner?
I’ll having the same issue with a 2020 330i G20. Unfortunately, the dealership will not clear the code if the brakes were replaced elsewhere. I’ve tried clearing from the secret menu, regular service menu and using Protool from BimmerGeeks. Nothing works.
2019 BMW X5 DHP, XDrive50i, M brakes
Looking for some help clearing the �480A12 — Read Brake Pad Sensor — rear Axle — wear limited reached� error. Wondering if anyone has successfully completed this at home, and if there�s some secret sauce I�m missing, or if once stored, only the dealer can clear this error code.
Long story, My 2019 BMW X5 (M brakes, 38K) started showing the rear brake pad sensor warning, I checked the pads, and they were worn. Replaced all around with OEM ATE pads, and replaced the rear brake pad sensor (GENUINE BMW 34-35-6-870-352) following the TIS instructions (activated parking brake in correct sequence). Car drives great, brakes work perfectly.
Unfortunately the computer is still showing the Rear Brake pad sensor warning. The reset option does not show in the dash�s diagnostic mode and my attempts to clear the error using BimmerLink are met with �Clearing failed.. please try again�.
I went so far as to short the sensor (don�t throw away your used sensor, it comes in handy) and go through the reset sequence multiple times, but to no avail.
There�s a lot of talk and videos on the internet, but I have yet to find a thread documenting an individual actually clearing this error code on MY2019.
Has anyone out there successfully cleared this error code on a 2019 BMW X5?
Any help would be greatly appreciated.
To able to reset the service for the rear or front brake you need to floow the reset procedure and the MOST important get your electric «hand» brake OFF before proceeding to the reset!